Transducer Connections - Raymarine RVX1000 Installation Instructions Manual

4.4 Transducer connections

Warning: Transducer cables
Do not remove the transducer cable whilst the product is powered on, doing so
can cause sparks. If the transducer cable is accidently removed whilst the product
is powered on, switch the product's power off, replace the cable and then switch
the power back on.
Caution: Do not cut transducer cables
• Cutting the transducer cable severely reduces sonar performance. If the cable
is cut, it must be replaced, it cannot be repaired.
• Cutting the transducer cable will void the warranty and invalidate the European
CE mark.
64