Sony MHC-V41D Operating Instructions Manual page 76

The Party Chain and Speaker
Add function
Wired Party Chain function cannot
be activated.
Check the connections
• •
(page 54).
Make sure the audio cables are
• •
connected correctly.
"PARTY CHAIN" is flashing on the
display.
You cannot select the AUDIO IN
• •
function if you make connection
 (page 54) during the Wired
Party Chain function. Select other
function.
Hold down PARTY CHAIN on the
• •
unit.
Restart the system.
• •
The Wired Party Chain function
does not work properly.
Turn off the system. Then, turn
• •
it back on again to activate the
Wired Party Chain function.
Unable to connect a BLUETOOTH
device with the system in the
Wireless Party Chain function.
After connecting all of the
• •
systems, perform the pairing
procedure between the
BLUETOOTH device and the Host
Audio System. Then perform the
BLUETOOTH connection.
Unable to connect a BLUETOOTH
device with the system in the
Speaker Add function.
After connecting two MHC-V41D
• •
systems, perform the pairing
procedure between the
BLUETOOTH device and Host
system. Then perform the
BLUETOOTH connection.
76
GB
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
1
Unplug the AC power cord (mains
lead), then plug it back in.
2
Press  to turn on the system.
3
Hold down MEGA BASS and
GUITAR for about 3 seconds.
"RESET" appears on the display.
After the reset completes, the
system automatically reboots. Press
 to turn on the system.
All user-configured settings, such as
preset radio stations are reset to
factory default setting, and all the
BLUETOOTH pairing information is
erased.
Returning the setup menu
settings to the default
You can return the setup
menu settings (except for
[PARENTAL CONTROL] settings) to
the default settings.
1
Hold down SHIFT and press
SETUP.
The setup menu appears on the TV
screen.
2
Press / repeatedly to select
[SYSTEM SETUP] and press
3
Press / repeatedly to select
[RESET], then press
4
Press / repeatedly to select
[YES], then press
It takes a few seconds to complete.
Do not press  while resetting the
system.
.
.
.