Sony MHC-V41D Operating Instructions Manual page 22

To listen to TV sound via the system
If you do not connect the system to the TV's HDMI IN (ARC) jack, make this
connection.
To listen to TV sound, press FUNCTION repeatedly to select "TV."
Hint
You can also enjoy the sound of external equipment (DVD players, etc.) via the system
• •
by connecting to the AUDIO/PARTY CHAIN IN (TV) jack as connection  above. For
details, refer to the operating instructions of your equipment.
If the audio output level from the system is low when connecting the external
• •
equipment, try adjusting the audio output settings on the connected equipment. It
may improve the audio output level. For details, refer to the operating instructions of
your equipment.
If "CODE 01" and "SGNL ERR" appear on the display of the unit
When the audio input signals to the system are other than 2-channel
Linear PCM signals, the messages "CODE 01" and "SGNL ERR" (indicate that
the input audio signals are unsupported) appear on the display of the unit.
In this case, select the proper audio output mode on the TV in order
to output 2-channel Linear PCM audio signals. For details, refer to the
operating instructions of your TV.
22
GB

Audio cable (not supplied)