To change the setting manually
See "Using the Setup Menu"
To quit the quick setup
Hold down SHIFT and press SETUP.
The guide message appears when you
turn on the system for the first time or
after performing [RESET] (see "Returning
the setup menu settings to the default")
Changing the display
Press DISPLAY repeatedly while
the system is turned off.
Each time you press the button, the
display mode changes as follows.
The messages about the main
features of this system scrolls across
the display and the illumination
To turn off the illumination, press
No display (Power Saving mode)
The display is turned off to conserve