ENGLISH
Press the [ENTER] button.
Use [▲/▼] buttons to select [ON] or [OFF].
Once the right mode is shown on the display, press the [ENTER] button to select it.
Press the [MENU] button to return to the main menu.
Display mode [dISP]
Rotate the display over 180° (upside-down) or not.
Press the [MENU] and [▲/▼] buttons until [dISP] is shown on the display.
Press the [ENTER] button.
The display will show [oFF]
Tilt Inversion [tIL]
OFF: Tilt movement is not inversed.
ON: Tilt movement is inversed
Press the [MENU] and [▲/▼] buttons until [tIL] is shown on the display.
Press the ENTER button.
Use [▲/▼] button to choose [OFF] (normal) or [On] (tilt inversion) mode.
Once the right mode is shown on the display, press the ENTER button to select it.
Press the [MENU] button to return to the main menu.
Pan Inversion [PAn]
OFF: Panning movement is not inversed.
ON: Panning movement is inversed
Press the [MENU] and [▲/▼] buttons until [PAn] is shown on the display.
Press the ENTER button.
Use [▲/▼] button to choose [OFF] (normal) or [On] (pan inversion) mode.
Once the right mode is shown on the display, press the ENTER button to select it.
Press the [MENU] button to return to the main menu.
Sound mode [Soun]
Used to activate or deactivate sound control.
Press the [MENU] and [▲/▼] buttons until [Soun] is shown on the display.
Press the ENTER button.
Use [▲/▼] button to choose [OFF] (DMX or Master/slave control) or [On] (sound) mode.
Once the right mode is shown on the display, press the ENTER button to select it.
Press the [MENU] button to return to the main menu.
Show mode [SHMd]
Used to start running automatic shows in standalone or Master/slave mode.
Press the [MENU] and [▲/▼] buttons until [SHMd] is shown on the display.
Press the ENTER button.
Use [▲/▼] button to choose [SH1...SH8] .
Once the right mode is shown on the display, press the ENTER button to select it.
Press the [MENU] button to return to the main menu.
Master/slave mode [SLMd]
Used to make the slave unit work synchronized with the Master.
Press the [MENU] and [▲/▼] buttons until [SLMd] is shown on the display.
Press the ENTER button.
Use [▲/▼] button to choose [MASt] or [SL 1].
Once the right mode is shown on the display, press the ENTER button to select it.
[MASt] will start the machine running a show as Master.
[SL 1] will make the machine running as Slave when physically connected to a Master.
Press the [MENU] button to return to the main menu.
Speed mode [SPMd]
Used to run sound controlled shows in high or low speed mode.
Press the [MENU] and [▲/▼] buttons until [SPMd] is shown on the display.
Press the ENTER button.
®
JB SYSTEMS
5/10
USER MANUAL
STRIKER