ABB CP650-x Operating Instructions Manual page 24

System Mode

System Mode is the complete interface of the system settings tool where all options are available.
Additionally to the options of the User Mode the following options are available:

Format Flash: allows to format the internal panel flash disk

Resize Image Area: allows to resize the flash portion reserved to store the splash screen image dis-
played by the unit at power up; default settings are normally ok for all the units

Download Configuration OS: allows to check current version and upgrade the back-up operating sys-
tem, see below in the next chapter for additional details

Download Main OS: allows to check current version and upgrade the main operating system, see be-
low in the next chapter for additional details

Download Splash Image: allows changing the splash screen image displayed by the unit at power
up; the image should be provide in a specific format. We suggest to update Splash Screen Image di-
rectly from Studio software which supports this feature starting from V 1. 50

Download Bootloader: allows to check current version of the system boot loader and to upgrade it,
see below for additional details

Download Main FPGA: allows to check current version and upgrade the main FPGA firmware, see
below for additional details

Download Safe FPGA: allows to check current version and upgrade the back-up (safe) copy of the
FPGA Firmware, see below for additional details

Download System Supervisor: allows to check current version and upgrade the system supervisor
firmware responsible for RTC and power supply handling, see below for additional details
Operating Instructions 23
CP600/Issue: 12.2011