Rear View; Back Panel Views; Table 7: Back Panel Mechanical Features - 32", 42" And 55" Displays; Figure 8: Rear View - Kontron F632 User Manual

5.2.

Rear View

Each display size has a specific back panel where the main items are the position of the main items differ The figure
below shows a 55-inch display back panel and describes the main elements.

Figure 8: Rear View

7
6
1. VESA mounting holes (M6)
2. Control Panel
3. Two cable lead through for maximum of
up to 6 cables (factory-configured)

5.2.1. Back Panel Views

The back panel of the F632 (32-inch), F642 (42-inch) and F6 (55-inch) displays provide factory configured cables led out
of the housing for direct connection. Specific features of each back panel are listed in the table below.

Table 7: Back Panel Mechanical Features - 32", 42" and 55" Displays

Back Panel View
32"
www.kontron.com
5
4
2
3
4. Warning label
5. Protective earth pin
6. Main power button
7. Type label
Features
Rear side
 8x VESA mounting holes (M6) safety eyelet 13 mm maximum
depth
 1x OSD Control Panel keypad
 2x cable lead through (standard - 3 hole lead through)
Top Side
 3x barrel hinges
 4x VESA mounting holes (M8) with safety eyelet 15 mm
maximum depth, to hang the system
Bottom Side
 3x locking screws
FlatView XXL Monitor – User Guide Rev. 1.0
1
// 23