Using The Cursor On The Structurescan Panel; Viewing Structurescan History - Lowrance 5 HDI Operator's Manual

Using the cursor on the StructureScan
panel
By default, the cursor is not shown on the StructureScan image. To
position the cursor on the image, press the Cursor/Waypoint key.
Use the Arrow keys to position the cursor.
When you position the cursor on a SideScan image, the screen
pauses, and the cursor information window is activated. On a
SideScan image, the left/right distance from the vessel to the cursor
are shown at the cursor position.
To remove the cursor and the cursor elements from the panel, press
the Cursor/Waypoint key.

Viewing StructureScan history

You can view StructureScan history by panning the image. To pan
the image, press the Cursor/Waypoint key to position the cursor on
the image. This stops automatic scrolling.
• Use the down Arrow key to move the cursor to bottom edge of
the image. Continue pressing the down Arrow key so the image
pans down and the historical image is viewed.
• Use the up Arrow key in the same manner to pan the image back
up and display the most current image.
• To resume normal scrolling, press the Cursor/Waypoint key to
remove the cursor from the image.
StructureScan | Hook² Series Operator Manual
61