Trails - Lowrance 5 HDI Operator's Manual

The Edit Route dialog
You can add and remove routepoints, and change route properties
using the Edit Route dialog.
This dialog is activated by placing the cursor over the route and
selecting the route in the menu.
The dialog can also be accessed by selecting the route tab in the
dialog displayed when you select the Waypoint, Routes, and Trails
tool on the Home page.
Select the name field to change the name. Turn on Display to show
the route on the panel.

Trails

Trails are a graphical presentation of the historical path of the vessel,
allowing you to retrace where you have travelled.
Trails can be converted to routes from the Edit Trails dialog. Refer to
"Converting Trails to Routes" on page 42.
43
Waypoints, Routes, and Trails | Hook² Series Operator Manual