Bypass; Lockout Reset; Test - ACS G series Owner's Manual

Bypass

This menu should not be used by anyone other than authorized
service personnel. It allows to bypass a alcohol test, before starting
the vehicle and requires a service code that is only available with the
authorized personnel.

Lockout Reset

The handset may sometimes get locked out, if there is a violation in
doing a breath test. It will then have to be reset using a lockout reset
code, which is only available with the authorized service personnel.
Each lockout is logged by the hand set.

Test

This menu lets you perform certain test on the handset. The test
available are:
• Sleep: Puts the handset in sleep mode immediately, to test that the
mode is working properly.
• Reset HS: Lets you reset the handset. Resetting handset may be
required occasionally, if there is a communication error and gets
frozen. Selecting this option, first turns the handset off and then on,
before it goes through a warm-up sequence.
• Reset RM: Resets the ECU.
• Analog Signals: Displays analog signals from the battery, heater
and so on.
• Speaker Test: Allows you to test if the speaker is functioning
properly. To test, select the option and press the navigation button to
Switch. You can switch speaker on and off for the test.
• LED Test: Makes sure that the LED indictor near the mouthpiece is
working properly. It tests all the colours and flashing sequence.
Press the navigation button to the right to change the colour. The
G Series User Guide
13