Warm-Up And Standby (Where Applicable) - ACS G series Owner's Manual

WARNING! Do not attempt another breath test until you are sure that your
alcohol level is under the limit. A second failed test may result in a longer
lockout time. Please refer to your compliance guide for actual program
requirements and details specifying program violations.
All breath tests are logged by G Series and are downloaded during
routine service appointments. Any instance of alcohol detected in the
breath samples may be considered as a program violation. Refer to
your compliance guide for specific limit amounts.

Warm-up and Standby (where applicable)

G Series User Guide
Lockout
You have failed the breath test. The alcohol level
detected is over the preset limit. You may NOT
start the motor.
Lockout and a countdown timer display. Wait for
the countdown to finish before attempting another
breath test.
Once you have started your vehicle, Drive
Safely displays.
You can place G Series in Warm-up mode by
holding the navigation button. Warm-Up
displays, and your vehicle can remain idle
without requiring another breath test for up to
30 minutes.
To exit this mode, hold the right button. This
mode automatically terminates if the RPM of
your engine increases.
7