Following Operation; Highway And Transport Operations - Demco Gravity Flow 550 User Manual

Wagon
Table of Contents

Advertisement

• When halting operation, even periodically, set tractor or towing vehicles brakes, disengage PTO, shut off engine,
and remove ignition key.
• Be especially observant of operating area and terrain. Watch for holes, rocks, or other hidden hazards. Always
inspect area prior to operation.
-
DO NOT operate near edge of drop-off or banks.
-
DO NOT operate on steep slopes as overturn may result.
-
Operate up and down (not across) intermediate slopes. Avoid sudden starts and stops.
• Pick the most level possible route when transporting across fields. Avoid edges of ditches, gullies, and steep
hillsides.
• Be extra careful when working on inclines.
• Maneuver tractor or towing vehicle at safe speeds.
• Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or death.
• Avoid loose gravel, rocks, and holes; they can be dangerous for equipment operation or movement.
• Allow for unit length when making turns.
• Do not walk or work under raised components or attachments unless securely positioned and blocked.
• Keep all bystanders, pets, and livestock clear of work area.
• Operate towing vehicle from operators seat only.
• Never stand alongside of unit with engine running or attempt to start engine and/or operate machine while
standing alongside of unit.
• Never leave running equipment unattended.
• As a precaution, always recheck hardware on equipment following every 100 hours of operation. Correct all
problems. Follow maintenance safety procedures.

folloWING oPeRATIoN

Following operation, or when unhitching, stop tractor or towing vehicle, set brakes, shut off engine and remove ignition
key.
Store unit in an area away from human activity.
Do not park equipment where it will be exposed to livestock for long periods of time. Damage and livestock injury
could result.
Do not permit children to play on or around stored unit.
Make sure all parked machines are on a hard, level surface and engage all safety devices.
Wheel chocks may be needed to prevent unit from rolling.

hIGhWAy ANd TRANsPoRT oPeRATIoNs

• SAFETY CHAINS: If equipment is going to be transported on a public highway, always follow state and local
regulations regarding safety chains and auxiliary lighting. Be sure to check with local law enforcement agencies
for your own particular regulations. Only safety chains (not elastic or nylon/plastic tow straps) should be used
to retain connection between towing and towed machines in event of separation of primary attaching system. Use
a high strength, appropriately sized hitch pin with a mechanical retainer and attach safety chains. Criss cross
chains under tongue and secure to draw bar cage, mounting loops, or bumper frame.
• Adopt safe driving practices:
-
Keep brake pedals latched together at all times. NEvER USE INDEPENDENT BRAKING WITH MACHINE
IN TOW, LOSS OF CONTROL AND/OR UPSET OF UNIT CAN RESULT.
-
Always drive at a safe speed relative to local conditions, ensure that your speed is low enough for an
emergency stop. Keep speed to a minimum.
Page 6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gravity flow 750Gravity flow 650

Table of Contents