Thank you for purchasing a Demco Gravity Flow Wagon. We feel you have made a wise choice and hope you are
completely satisfied with your new piece of equipment. Proper care and use will result in many years of service.
WARRANTy PolIcy, oPeRAToR MANuAls & ReGIsTRATIoN
Go online to www.demco-products.com to review Demco warranty policies, operator manuals and register your Demco product.
WARNING:
INsTRucTIoNs:
Never overload wagon. Do not exceed the rating of the gear or load rating of the tires, whichever
is less.
Ensure that anybody present is clear before applying power to any machinery used in conjunction
with wagon box or when moving box.
Never allow anyone in, near, or on gravity box during transporting or unloading of grain.
Moving grain is dangerous and can cause entrapment, resulting in severe injury or death by
suffocation.
Do not exceed 20 miles per hour when towing wagon.
1. Unless otherwise specified, high-strength (grade5)
(3 radial-line head markings) hex head bolts are used
throughout assembly of this piece of equipment.
2. Whenever terms "LEFT" and "RIGHT" are used in
this manual it means from a position behind wagon
box and facing forward.
3. When placing a parts order, refer to this manual for
Safety, Signal Words ........................................................................................................... 3
Safety Sign Care ................................................................................................................. 4
Tire Safety ........................................................................................................................... 5
Before Operation ................................................................................................................. 5
During Operation ................................................................................................................5-6
Following Operation ............................................................................................................ 6
Performing Maintenance ..................................................................................................... 7
Safety Sign Locations ......................................................................................................... 8
Bolt Torque .......................................................................................................................... 9
INTRoducTIoN
To AvoId PeRsoNAl INjuRy oR deATh, obseRve folloWING
GENERAL INFORMATION
Table of Contents
Page 2
proper part numbers and place order by PART NO.
and DESCRIPTION.
4. Read assembly instructions carefully. Study
assembly procedures and all illustrations before
you begin assembly. Note which parts are used in
each step. This unit must be assembled in proper
sequence or complications will result.