D3, Select Link
D3.1 Using USB interface to access the LS-20.
Select USB .
D3.2 Using Ethernet interface to access the LS-20
D3.2.1, Select Ethernet (Remote) .
D3.2.2, Enter the IP address or domain name and the Port number of the LS-10 and click Add.
IP address or Domain Name and port number
D3.3.3, Mark the IP address and click the Target to assign this address as the operation target.
66
The software will scan the
USB ports that are
available in your PC.
Select the correct one to
use.