Setting For Sound & Siren - FineControl LS-20 Operation Manual

8.3 Setting for Sound & Siren
* Record /Playback Voice: After an alarm call connects successfully, the LS-30 will play the
prerecorded voice message that corresponds to the alarm type.
The messages should be recorded in their specified segments.
Common Segment (13 seconds): The voice to be played during all alarm types. This segment should
contain your name, address and telephone number.
Ex: "This is ---, I live at---, phone number is---."
Panic Segment (4 seconds): The voice to be played during a Panic alarm.
Ex: "Break-in! Break-in! Calling for emergency help."
Burglar Segment (4 seconds): The voice to be played during a Burglar alarm.
Ex: "Burglar! Burglar! Calling for emergency help."
Fire Segment (4 seconds): The voice to be played during a Fire alarm.
Ex: "Fire! Fire! Calling for emergency help."
Medical Segment (4 seconds): The voice to be played during a Medical alarm.
Ex: "Heart patient! Calling for emergency help."
Special Segment (4 seconds): The voice to be played during a Special alarm.
Ex: "High temperature in the building! Calling for an alert."
Latchkey Disarm (4 seconds): The voice to be played when a latchkey user disarms the system.
Ex: "I'm home."
Latchkey Away (4 seconds): The voice to be played when a latchkey user sets the system in AWAY mode.
Ex: "I'm out."
*Door Bell (default = ON):
The Base Unit will issue a doorbell beep in Disarm Mode when receiving a triggering signal from a
Burglar sensor with its "Bell in Disarm = ON".
Note: The Bell function only works for the Burglar Sensor with "Bell in Disarm = Yes".
28