FineControl LS-20 Operation Manual page 43

42
A1.2, Configure the Router.
The following example is for Fixed IP address application. But if you have no Fixed IP address
then you can apply some free DDNS service from the internet.
For example D-Link provides free DDNS service for their routers.
http://support.dlink.com/emulators/wbr2310/tools_ddns.htm
Enter the setup menu of your Ethernet Router and find the setting of Virtual Server.
Select a proper internal IP address and corresponding port number for the TCP/IP communication
protocol.
Ex: The internal IP address of 192.168.0.90 and port number 1690 is assigned in the Virtual Server
table.
(This IP address and port number will be used to communicate with the LS-20 by HyperSecureLink
program or mobile Apps.)
A1.3, Configure the Ethernet Adaptor
* RUN the VCOM program on your PC.
Click the Search