Placement Of The Base Unit And Sensors - FineControl LS-20 Operation Manual

4.2 Placement of the Base Unit and Sensors

It is important for the Base Unit to have a good reception quality for the RF signals transmitted from all
the sensors and controllers.
 Place the Base Unit near the central of your home or business if possible.
 Keep the Base Unit away from large appliances and other metal objects.
 Locate the Base Unit near a power outlet and the router.
Install all the sensors according to your site planning.
Check the radio signal quality from the CS ("Current Status" in "Device Status") reading from the
HyperSecureLink software or signal bar from Cloud server or Mobile App. (MyHome) by
pressing the test button on the sensors or trigger the sensor's action. Relocate the sensors/Base
Unit to get the best signal strength if necessary.
If the dB number is less than 40dB or without bar indication then you should consider to
adjust the location of the sensors/Base Unit or add a RF Repeater to the system to extend
the RF operation range. (Do not attach the transmitter on a metal surface, this will shrink
the RF signal effective range seriously.)
13