FineControl LS-20 Operation Manual page 51

Note: If you change the User Name and Password, please make sure that you write them down on
a paper otherwise if you forget the new User Name and Password then this adaptor will
not be accessable any more.
* If any of the settings has been changed then double click the Update to update the settings.
Then Click the Reset to save the settings.
Use VCOM software to locate the new IP address and enter the Ethernet Interface setup web page again.
* Select TCP Mode and change the settings according to the information from the web server or CMS
service provider.
Server/Client: Select Client.
Port Number: Please check with your web server or CMS service provider for this information.
Remote server IP Address: Please check with your web server or CMS service provider for this
Client mode inactive timeout: 20 minutes (default).
Server mode protect timeout: 60 minutes (default).
* Double click the Update to update the settings.
Then Click the Reset to save the settings.
50
information, either IP address or domain name.
Telnet