Maintenance - Curtis MultiMode 1228 Manual

8 — MAINTENANCE
8
46
There are no user serviceable parts in the Curtis 1228 controller. No attempt
should be made to open, repair, or otherwise modify the controller. Do-
ing so may damage the controller and will void the warranty. However, it is
recommended that the controller's fault history file be checked and cleared
periodically, as part of routine vehicle maintenance.
FAULT HISTORY
A Curtis programming device can be used to access the controller's fault his-
tory file. The programmer will read out all the faults that the controller has
experienced since the last time the history file was cleared. The faults may be
intermittent faults, faults caused by loose wires, or faults caused by operator
errors. Faults such as HPD or overtemperature may be caused by operator
habits or by overloading.
After a problem has been diagnosed and corrected, clearing the history
file is advisable. This allows the controller to accumulate a new file of faults. By
checking the new history file at a later date, you can readily determine whether
the problem was indeed fixed.

MAINTENANCE

Curtis 1228 Manual,
Rev. F