Service & Programming - Fetco CBS-2141 Users Manual And Operator Instructions

Service & Programming
Menu adjustments, name selection, programming, error codes, counters are accessed by activating touch screens.
To access the General Service Menu
PROGRAM, GENERAL, INPUTS, OUTPUTS, and OTHER (Service Menu).
Enter Service Menu by accessing the power switch on back of the panel
1)-Switch power "OFF" with power switch located on rear of brewer
2)-After at least ten seconds: Turn power switch "ON"
3)-Quickly touch and hold the XTS screen to enter the programming screens as shown below
4)-When entering The SERVICE MENU: the first screen in the group is "PROGRAM"
5)-Use right and left arrow icons to navigate through the five main SERVICE menu groups.
6)-The DOWN arrow navigation icon will open the FEATURE icon below.
6a)-Navigate through the Menu Item with the arrows, edit any if needed
6b)-When finished editing—press the UP arrow to go back through the menu items to save changes and exit
7)-The chart on the next page give the general service menu topics, the pages following list the details of the topics
When navigating up to "EXIT" leaves the Service Menu Screens and SAVES your settings on exiting.
The Menu Chart on the next page shows the main categories of the five SERVICE menus
When SERVICE MENU is entered—the first selection is "PROGAMMING Mode "
Scroll through the five programming categories using the right and left arrow icons.
<
PROGRAM
Five Progamming
< Batch 1 Left >
Menus
<<
Use right and left arrow icons to navigate between the five main SERVICE menus
Navigating PROGRAMMING MENUES
Highlight desired menu path and location and use arrow icons to navigate service menu screens.
First menu screen
<
PROGRAM
is "PROGRAM"
< Batch 1 Left >
Note highlighted
Path and Topic
<<
Highlight programming path and use arrows to locate programming screen
Go to fetco.com for the latest versions of all information
> < GENERAL >
<Tank Temperature>
^ ^
>>
<<
TOUCH
V V
< PROGRAM >
>
< Batch 1 Left >
^
^
>>
<<
V
V
Page 4
< >
INPUTS
<Display Inputs>
^
>>
>>
<<
TOUCH
TOUCH
V
< PROGRAM >
< Batch 1 Left >
< Batch Summary>
^
>>
>>
<<
V
Part A-User Guide & Operator instructions
EXTRACTOR
TOUCHSCREEN
CBS_2100XTS
Ready
Heating
Filling
< OUTPUTS > < OTHER >
Show Summary Error Codes
< > <
^
>>
<< <<
TOUCH
V
HIGHLIGHT
< PROGRAM >
Right 1 Summary
< Batch 1 Left >
< Batch Summary>
Batch Name Regular 1
< Display Summary >
Batch Volume 3.05 liter
Brew Time
^
Number of Pulses
>>
<<
Prewet Percent
Prewet Delay
V
Drip Delay
Touch to return
P130 Part A Rev. 002 March 2016
XTS
™
Touch
screen
to unlock
>
^
>>
V
4 :00
8
0 %
0:00
2:00