Mounting Dimensions (Unit = Mm); Din-Rail Mounting - Weidmuller IE-SW-VL08-8GT Hardware Installation Manual

Mounting Dimensions (unit = mm)

DIN-Rail Mounting

The aluminum DIN-rail attachment plate should already be fixed to the back
panel of the Ethernet Switch when you take it out of the box. If you need to
reattach the DIN-rail attachment plate, make sure the stiff metal spring is
situated towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-rail into the
slot just below the stiff metal spring.
To remove the DIN-rail from the Ethernet Switch, simply reverse Steps 1 and 2.
STEP 2:
The DIN-rail attachment unit will
snap into place as shown below.
- 4 -