Pc Configuration - Avaya BCM450 Rls 6.0 Task Based Manual

Hide thumbs Also See for BCM450 Rls 6.0:

Table of Contents

BCM450 System Start Up

PC Configuration

The BCM has a dedicated OAM port. It is recommended that you perform any

maintenance/configuration from this port. There are also 2 dedicated LAN

ports for connecting to the network

A PC/laptop can be configured to connect to the BCM OAM in two ways:

 Set your PC/laptop to obtain an IP Address automatically (preferred ,

as DHCP is always operating on the OAM port)

 Manually set your PC/laptop's IP Address (IP Address: 10.10.11.2,

Subnet Mask: 255.255.255.252)

 (Note that the OAM port default settings are IP Address: 10.10.11.1,

Subnet Mask: 255.255.255.252)

The default setting for the LAN Ports is:

 IP Address: 192.168.2.2

 Subnet Mask: 255.255.254.0

 Default Gateway 192.168.1.1

For information concerning configuring the network settings of your PC, refer

to the Networking Essentials Guide.

NN40010-317 Issue 1.2 BCM450 Rls 6.0

Table of Contents