Code Identification Feature; Product Operation - Zenith ZRF1 User Manual

Code Identification

Code Identification Feature

The Code Identification Feature allows you to identify
the three digit library code stored under your device key.
For example, if you want to find out what three digit
code is stored under your TV device key, follow the six
steps below:
1. Press and hold the
CODE SEARCH
red indicator stays on. Release the
button.
2. Press and release the desired mode button (TV,
, etc.). The red indicator blinks, then stays lit.
VCR
3. Press and release the
CODE SEARCH
red indicator blinks off.
4. To find the first digit for the code stored under the
mode key pressed in step 2, press each numeric key
from 0-9 in turn. When the red indicator blinks off
the number you pressed is the first digit for the code
you are searching for.
5. To find the second digit, repeat step 4, this time
when the red indicator blinks off this is the second
digit.
6. Repeat step 4 again to find the third digit.
CODE
SEARCH
1, 3.
SAT
VCR
TV
2.
CHAN
PAGE
REPEAT
PAGE
FLASHBK
CHAN
RATIO SURF
SIGNAL
INPUT
1 2
4, 5, 6.
4 5
7
8
16
button until the
CODE SEARCH
button. The
POWER
DVD
AUX
SUBTITLE
DATE
HELP SD/HD
3
6
9

Product Operation

After the batteries are installed and you have
programmed the remote for the codes that operate your
products, you can use your remote to operate a TV, VCR,
Satellite Receiver, DVD Player, etc.
TV (Press TV First)
VCR
(Press VCR First)
To Operate:
1. Press the TV, VCR, SAT, DVD,
etc. button (depending on
which product you want to
operate).
2. Aim the remote at the product.
3. Press POWER to turn on the
product.
4. Press other buttons to operate
the features of your product.
17
Satellite Receiver
(Press SAT first)
DVD Player
(Press DVD first)