Table of Contents
Advertisement
Wireless Receiver
The remote transmits wireless Radio Frequency (RF)
commands. The wireless receiver (included) receives
these commands and converts them to regular Infrared
(IR) commands. These IR commands are then emitted
from the IR Extender (also included) to control your A/V
components. This lets you control your A/V
components from ANY room in your home - you don't
need to aim the remote at your component!
supply (included) to this jack
Connect the IR Extender cord
(included) to this socket and
attach the IR emitters to the
front of the components you
want to control.
18
Connect the plug-in power
and plug the power supply
into any 120V AC outlet.
Antenna
IR emitters
Troubleshooting
Remote does not operate your product.
•
Press the mode button of the product you want to
control.
•
Program the remote with a new code.
•
Install new batteries. (You might have to reprogram
your remote after installing new batteries.)
•
Remote may not be compatible with your product.
Remote does not operate some features of your product.
•
Program remote with a new code.
•
Remote may not be able to operate all features of
your product or button names might be different
than your product.
Red Indicator blinks after you program a product code.
•
Remote did not accept the code.
•
Try to program the code again or try a different
code.
19
Advertisement
Table of Contents
