Advanced Functions - Zenith ZRF1 User Manual

Advanced Functions

DASH (-) Used to enter a channel number for multiple
channels such as 2-1, 2-2, etc. A broadcaster may
transmit multiple programs on a single channel. Multiple
programs are distinguished by a unique sub-channel
number, separated by a dash (-).
SEL (SELECT) Use with numbered buttons for instant
channel selection. When you press a channel number,
for example 22, the receiver awaits another button press
for three seconds and then tunes to 22.
SURF Shows the list of your Surf channels. A Surf
channel list can contain up to 50 channels. You can
return to normal viewing by pressing the EXIT button or
by pressing the SURF button again.
INFO Press this button when you are watching
®
DirecTV programming to display the Channel Banner
information and information about the current program.
Press again to remove the banner, or wait 10 seconds.
You can select the display mode, short or detailed, by
pressing the navigate up and down arrows. You can also
change the audio language, when available, by pressing
the left and right navigation buttons.
HELP Shows the on-screen "EZ Help" menu while you
are in normal viewing, or in an on-screen menu. To see
the help description of the selected option in the menu,
press and hold the HELP button.
NAVIGATION (UP, DOWN, LEFT, RIGHT arrows) Lets
you navigate the on-screen menus and adjust the
system settings and preferences, by moving to menu
option with the up, down, left, right buttons and
selecting the highlighted option with the button with a
circle on it (in the center of the navigation buttons). If
this button is pressing while in normal view, the informa-
tion banner is displayed.
RATIO Changes the picture aspect ratio. When you
view a picture with a wide (16:9) aspect ratio in 480i or
480p format, this button changes the display options
from Letterbox, to Cropped, to Squeezed, and back to
Letterbox. When you view a picture with a normal (4:3)
aspect ratio in 720p or 1080i format, this button changes
the display options from Normal, to Wide, to Panorama,
to Zoom1, to Zoom2, and back to Normal. Detailed
descriptions of the TV aspect ration are given in TV
aspect ration section of the Preferences Menu.
8
Advanced Functions, cont.
SIGNAL Shows the signal strength of the current
channel. For digital over-the-air or satellite channels you
my be able to improve the signals strength by adjusting
the direction of your over-the-air antenna.
SD/HD Set the output resolution of the SD (480i format)
and pre-selected HD (480p, 720p, 1080i, native, hybrid-1,
and hybrid-2 formats), If you want to use VCR recording,
set to STD format. Note, pressing SD/HD, then the
LEFT navigation button, then SEL, will always cause
the receiver to output SD (480i) display format. Pressing
SD/HD, then the RIGHT navigation button, then SEL,
will always cause the receiver to operate in the pre-
selected HD display format. I.E. the buttons will work no
matter what format had been selected.
FLASHBK (Flash Back) Returns to the last channel
viewed. Lets you move back and forth between the last
two channels viewed.
CC/DATE (Closed Caption) Lets you turn closed
caption on and off. The closed caption mode can be
selected in the Closed Caption section of the Preference
menu. You can also change the date by pressing the CC/
DATE button in the Advanced Program Guide. ™
Note, Close Caption will only appear when it is provided
by the broadcaster.
GUIDE button displays on-screen Satellite Channel
Guide.
CHANNEL+ and CHANNEL- buttons perform the
"Page+" and "Page-" function for on-screen Guide
Menus used by some Satellite systems.
MENU brings up the Satellite Menu screen - use with the
UP, DOWN, LEFT & RIGHT navigation buttons.
OK button is used for on-screen Menu selection.
EXIT button is used to Exit or Clear on-screen Menu
displays.
9