Upgrading the Cisco Nexus 3048 Switch software
Use this procedure to upgrade both the NX-OS Kickstart and NX-OS System images on the Cisco Nexus
3048 Switch.
About this task
Upgrade recommendations:
•
Upgrading the two images together.
•
Ensuring the version numbers of the images are the same.
•
Backing up the original configuration.
•
Verifying that the configuration has been updated successfully and then creating a backup of the
new configuration.
•
Ensuring two switches are upgraded. Verify that the first switch has not experienced a platform
outage before upgrading the second switch.
Before you begin
Obtain:
•
Console (terminal) access
•
Management IP access
•
A Cisco account to download any images
•
An SCP, TFTP, FTP, or SFTP server
•
Access to the software code
•
Release notes from Cisco
•
Sufficient free space on bootflash on the switch
Procedure
1
Go to the Cisco Support website and download the NX-OS Kickstart and NX-OS System
Software for the Cisco Nexus 3xxx series switch.
2
Upload the two files to the switch using TFTP, SCP, FTP, or SFTP to bootflash.
3
To back up the switch running the configuration, type:
copy running-config startup-config
53
|
Managing networking resources