Serial Number Label; Safety Precautions - Western Tornado 78000-1 Owner's Manual

SERIAL NUMBER LABEL

(Located on driver's side, next
to warning/caution label.)
Code
YY
MM
DD
LL 2-Digit Location Code
XXXX 4-Digit Sequential Number
ZZZZZZ 5- to 7-Digit Assembly PN
Lit. No. 99761/99762, Rev. 02
SAFETY
Definition
2-Digit Year
2-Digit Month
2-Digit Day

SAFETY PRECAUTIONS

Improper installation and operation could cause
personal injury and/or equipment and property
damage. Read and understand labels and the
Owner's Manual before installing, operating, or
making adjustments.
• Driver to keep bystanders minimum of
25 feet away from operating spreader.
• Before working with the spreader, secure all
loose-fitting clothing and unrestrained hair.
• Before operating the spreader, verify that all
safety guards are in place.
• Before servicing the spreader, wait for
conveyor, auger, and spinner to stop.
• Do not climb into or ride on spreader.
Overloading could result in an
accident or damage. Do not exceed
GVWR or GAWR ratings as found
on the driver‑side vehicle door
cornerpost. See Loading section to determine
maximum volumes of spreading material.
Do not install the control for this product in
the deployment path of an air bag. Refer to
vehicle manufacturer's manual for air bag
deployment area(s).
If rear directional, CHMSL light, or brake
stoplights are obstructed by the spreader, the
lights shall be relocated or auxiliary directional
or brake stoplights shall be installed.
During the hopper installation we recommend
the addition of an OSHA compliant Backup
Alarm. This alarm is required for OSHA
governed employers.
6
WARNING
WARNING
WARNING
CAUTION
CAUTION
January 1, 2017