Spreader Specifications; Determining Vehicle Payload - Western Tornado 78000-1 Owner's Manual

Hopper spreader
Hide thumbs Also See for Tornado 78000-1:
Table of Contents

Advertisement

SPREADER SPECIFICATIONS

Spreader
Description
Regular Capacity
7' Hopper Body
Double‑Wall Poly
8' Hopper Body
w/o Collar
Double‑Wall Poly
8' Hopper Body
w/ Collar
Double‑Wall Poly

DETERMINING VEHICLE PAYLOAD

WARNING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR
ratings as found on the driver‑side door
cornerpost of the vehicle. See Loading
section to determine maximum volumes of
spreading material.
1. Install the hopper spreader and optional
equipment according to the instructions.
2. Install or attach any other equipment that will be
on the vehicle while the hopper spreader will be in
use (step bumper, trailer hitch, snowplows, etc.).
Fill gas tanks.
3. Obtain the Gross Vehicle Weight Rating (GVWR),
Front Gross Axle Weight Rating (FGAWR) and
Rear Gross Axle Weight Rating (RGAWR) from
the certification label located inside the driver-side
door jamb or door.
4. With the occupants in the truck for normal hopper
spreader operation, weigh the vehicle to obtain
gross vehicle weight (GVW).
Lit. No. 99761/99762, Rev. 02
LOADING
Overall
Empty
Length
Weight
(in)
(lb)
108
591
117
660
117
734
Capacity
Overall
Struck
Width
(cu yd)
(in)
1.5
63
1.8
63
2.5
63
5. Subtract the GVW from the GVWR to determine
the available material payload.
6. Obtain the weight per cubic yard (lb/cu yd) of
the desired material. Divide the weight into the
payload to determine the maximum volume of
material that can be carried.
7.
Compare the maximum volume to determine the
maximum height of the material in the hopper
spreader.
8. Fill the hopper with the material to the calculated
height. Reweigh the vehicle with occupants and
verify that the GVW, Front Gross Axle Weight,
and Rear Gross Axle Weight are less than the
vehicle's ratings.
9. Repeat Steps 6–8 for each type of material.
Refer to the "Determining Vehicle Payload Worksheet"
for an example and worksheet.
10
Overall
Recommended
Height
Use
(in)
3/4–1 ton Pickup
44
Trucks above
8500 lb GVWR
3/4–1 ton Pickup
44
Trucks above
8500 lb GVWR
Dump Body –
51
Flatbed
January 1, 2017

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tornado 78003-1Tornado 78006-1

Table of Contents