Inserting Slip Paper - Epson TM-H6000V User Manual

English

Inserting Slip Paper

!
CAUTION:
Models with an MICR reader use a permanent magnet. Do not bring a magnetic card or the like near the
product.
When printing on slip paper, follow the steps below to insert the paper.
If your printer is equipped with a MICR reader, MICR reading is available by inserting the check paper so
that the MICR characters on the paper are on the right side.
1. Make sure the printer is turned on.
2. Set the paper so that the right edge of the paper contacts the paper guide on the right and insert the slip
paper. Refer to the label affixed to the printer.
Inserting Validation Paper
If your printer is a validation model, insert the paper in the same way as normal slip paper (See
) or follow the steps below.
Paper" on page 24
1. Make sure the printer is turned on.
2. Insert the paper with the right paper edge against the right side of the paper guide at the printer top, and
insert it as far as it will go.
3. Insert the paper straight down until the bottom edge of the paper touches the stopper.
"Inserting Slip
24