Power Led; Status Led; Network Leds - Mitel ST100DA Quick Install Manual

LEDs

Power LED

The blue power LED indicates the operating status of the switch.
Light Description
Steady The switch is powered on, and the internal software is running.
Flashing Continuous flashing or a two-flash pattern indicates a failed internal self-test (i.e. hardware
failure). Refer to "Configuring Switches" in the Mitel Connect System Administration Guide for
details on other flash patterns.
Off The switch is not powered on, or the software is not running.

Status LED

The status LED provides voice switch activity information.
Color Activity
Off
Steady
Green
Flashing-Fast
Steady
Flashing-Slow
Yellow
Flashing-Fast

Network LEDs

Each LAN connector provides two LEDs (Link/Act and 10/100/1000) that indicates the activity and
communication speed of the connected network.
LED Color/State
Off
Green-Steady
Link/Act
Green-Flashing
Off
10/100/1000
Green
Yellow
Description
No ports are assigned.
No ports are handling active calls.
At least one port is handling an active call.
No ports are handling active calls and at least one port is out of service.
The switch is not connected (or has lost connection) to a Mitel server.
At least one port is handling an active call and at least one port is out of service.
Description
There is no link present.
There is a link present, but no data packets are being transmitted or received.
There is a link present, and data packets are either being transmitted or
received.
A 10 Mbps link is present.
A 100 Mbps link is present.
A 1000 Mbps link is present.