Related Manuals for Mitel Streamline
Summary of Contents for Mitel Streamline
- Page 1 Mitel Streamline QUICK INSTALL GUIDE Release 1.2 December 13, 2021 Document version no 8005-02-01_RevF...
-
Page 2: Table Of Contents
Hardware Topology and Installation Overview .................. 4 Power Capabilities and Considerations ................6 Power PROTECTION and POWER SAVE ............... 6 Configuring the StreamLine (2 methods) ................... 6 Note the following: ......................7 Making changes or modifications ..................7 SAFETY WARNINGS AND PRECAUTIONS ................. 8 FCC StatementS ....................... -
Page 3: Quick Install
Quick Install Guide (this document) Dongle Package Includes: 6 x StreamLine dongles StreamLine is supported on both CAT-3 or better, and CW1308 cabling, of up to 365 m (1200ft) & 24 gauge or better. For more technical details, please consult the StreamLine Site Survey document. -
Page 4: Installation Considerations
LOCATION REQUIREMENTS Power - The StreamLine switch must be placed within 1.8 m (6ft) of an available power source. Do not use an extension cord to connect the equipment to a power outlet. Ventilation - To ensure proper ventilation of the StreamLine, leave at least 2" (5cm) of unobstructed space on all sides of the unit. -
Page 5: Supported Ip Phones
Mitel StreamLine Switch Quick Install Guide SUPPORTED IP PHONES All StreamLine products support IEEE 802.3af compliant IP phones that are designated Class 1 or Class 2. The StreamLine products support some Class 3 devices provided the device does not draw more than 10 watts. For... - Page 6 STP or RSTP. Obtain from the System Administrator the correct operational values for STP or RSTP and configure the StreamLine switch accordingly. Ensure that STP or RSTP is enabled on the StreamLine switch before connecting the uplink ports to the LAN. Note: This connection also permits in-band management over Ethernet.
-
Page 7: Power Capabilities And Considerations
DC output (right) connector on the top unit. This is required to create a fully redundant ring. Note: If you need to move a cable to a different DC connector on the StreamLine, press the hairpin clip at the top of the DC cable and pull the cable out. -
Page 8: Note The Following
WARNING: FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN IMPROPER EQUIPMENT OPERATION AND/OR RISK OF ELECTRICAL SHOCK. MAKING CHANGES OR MODIFICATIONS ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY MITEL WILL VOID ANY COMPLIANCE AND REGULATORY APPROVAL, AND WILL VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. -
Page 9: Safety Warnings And Precautions
Mitel StreamLine Switch Quick Install Guide SAFETY WARNINGS AND PRECAUTIONS Access to the interior Der Zugang ins Innere Seul un spécialiste El servicio de L'accesso all'interno di El acceso al interior de O acesso ao interior of this unit shall be des Gerätes ist nur... - Page 10 Mitel StreamLine Switch Quick Install Guide O acesso ao interior Alleen een Numai un tehnician Доступ к внутренней части Dostęp do wnętrza urządzenia 只有合格的技术人员才能访问本机内 dessa unidade deve ser gekwalificeerde calificat trebuie să этого устройства разрешен przysługuje wyłącznie 部。 feito apenas por um monteur heeft aibă...
- Page 11 Mitel StreamLine Switch Quick Install Guide System Grounding (Earthing) General Grounding WARNING: GROUND ALL SYSTEMS ACCORDING TO THESE INSTRUCTIONS BEFORE YOU CONNECT POWER LEADS. FOLLOW GROUNDING INSTRUCTIONS EXPLICITLY TO ENSURE THE SAFETY OF PERSONNEL. Cabinets always require redundant and independent equipment grounding conductors between the cabinet and the wiring system ground: an insulated grounding conductor and a supplementary (protective) ground.
-
Page 12: Fcc Statements
—Consult the dealer or an experienced radio/TV technician for help. Refer all servicing to a Mitel authorized repair facility. If you require a Mitel return authorization number, or information on obtaining service or repairs, please contact Mitel at the following telephone number: 1-800-722-1301 A Mitel return authorization number must be obtained before sending equipment to the Mitel repair facility (US Responsible Party). -
Page 13: En55032 And Cispr32 Statements
EN55032 AND CISPR32 STATEMENTS StreamLine Switch – 48 Port: Warning - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. StreamLine Dongle: This is a Class B product.
Need help?
Do you have a question about the Streamline and is the answer not in the manual?
Questions and answers