Related Manuals for Mitel ST100DA
Summary of Contents for Mitel ST100DA
-
Page 1: Quick Install Guide
ST100DA Voice Switch Quick Install Guide Mitel Networks Corporation 350 Legget Dr. Kanata, Ontario K2K 2W7 Canada +1.844.937.6483... -
Page 2: Installation Equipment
• One audio output port (3.5 mm stereo) for connecting to a corporate paging system or night bell. Mitel offers an optional paging adapter to provide a balanced output as well as a contact closure ideal for overhead paging systems. Refer to the Mitel Paging Adapter Quick Install Guide for information about the Paging Adapter. -
Page 3: Installation And Servicing
Installing the ST100DA in a 19-inch Rack The ST100DA is placed in a 19-inch rack only by installing a Mitel Rack Mount Dual Switch Tray into the rack, then installing the ST100DA Voice Switch into the Tray. You can install a ST100DA Voice Switch on the left or right side of the tray. Refer to the Mitel Rack Mount Dual Switch Tray Quick Install Guide for information on using the tray. -
Page 4: Servicing Procedures
ST100DA to Mitel for service. WARTUNGSVERFAHREN ACHTUNG: Der ST100DA enthält keine internen Teile, die vor Ort gewartet werden können. Senden Sie das Gerät an Mitel, falls Wartungsarbeiten erforderlich sein sollten. VORSICHT: Interne Sicherungen dürfen nur von qualifizierten Mitel-Mitarbeitern gewartet werden. Wenn interne Sicherungen ausgetauscht werden müssen, senden Sie den ST100DA zur Wartung an Mitel. Connecting the Mitel Voice Switch to the Network Once the ST100DA Voice Switch is secured to a rack or placed on a surface, you can connect it to the data network. -
Page 5: Optional Connections
Connect a music-on-hold source (CD player or other audio source) to the audio input port. Connect your site’s paging system to the audio output port. Mitel provides a Paging Adapter to facilitate paging connections. Refer to the Mitel Paging Adapter Quick Install Guide for more information. -
Page 6: Network Configuration
Mitel ST100DA Voice Switch RJ-21X Port Pinout When connecting an an ST100DA to a 24-port patch panel, the voice switch’s eight analog channels map to ports on the patch panel as shown in the table below. The Power Fail Transfer Unit provides an electrical connection between trunk channel 1 and the extension on channel 12. -
Page 7: Power Led
Steady No ports are handling active calls and at least one port is out of service. Flashing-Slow The switch is not connected (or has lost connection) to a Mitel server. Yellow Flashing-Fast At least one port is handling an active call and at least one port is out of service. -
Page 8: Specifications
T1 connection. Specifications Feature Specification Dimensions 14.65 x 8.35 x 1.65 inches (372 x 212 x 42 mm) Weight 5.3 lb (2.40 kg) Input voltage 100-240 VAC, 50-60 Hz Power consumption 1A max. Humidity 5-90% relative humidity (non-condensing) Operating temperature 0-50˚ C Copyright © 2018 Mitel Networks Corporation. All rights reserved. The Mitel word and logo are trademarks of Mitel Networks Corporation. Any reference to third-party trademarks is for reference only and Mitel makes no representation of ownership of these marks. 180702...