Resetting To The Factory Default Settings - Axis Video Server 240Q User Manual

Resetting to the Factory Default Settings

To reset the AXIS 240Q to the original default settings, go to the System Options >
Maintenance web page (as described in Maintenance, on page 40), or use the control
button on the front panel, as described below:
Using the Control Button
1. Switch off the AXIS 240Q by
disconnecting power.
2. Using a suitably pointed
object, press and hold the
Control button while you
reconnect power.
3. Keep the Control button
pressed until the Status
Indicator displays yellow (this
may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the AXIS 240Q has been reset.
6. Re-install the AXIS 240Q. See the Installation Guide.
AXIS 240Q - System Options
Status Indicator
Control Button
43