Mounting Steps - AC Infinity AIRTAP T4 User Manual

MOUNTING STEPS

STEP 1
Measure the size of your register vent to make
sure that this model will fit. Standard sizes
come in 4x10", 4x12", 6x10", 6x12", etc.
STEP 2
Remove your previous register grille. Some
grilles may require you to use a philip
screwdriver to remove their mounting screws.
8
MOUNTING STEPS
STEP 3
Determine how the register fan will be
powered, whether the power source is inside
the wall or an outlet outside the wall. Please
plug the adapter into the outlet.
STEP 4
Run the power cord towards the opening of
the vent to where the register fan unit will be
mounted.
9