Connections - JVC NX-T10 Instructions Manual

Connections

INFO
Do not connect the power cord until all other connections have been made.
Detach the connector cover from the main unit and
connect the cords by passing them through the hole of
the connector cover.
When placing the main unit vertically
• Attach the connector cover again to the main unit after connections has been completed.
Rear panel of the main unit
~ HDMI IN 1/HDMI IN 2/DIGITAL IN
(OPTICAL)
From the output of a Blu-ray device or a
Digital Set Top Box
See page 6.
Ÿ HDMI MONITOR OUT
From the input of a TV/monitor
See page 6.
! FM. ANT
From the FM antenna
See page 7.
⁄ AUDIO IN
From the output of an analog audio device
See page 7.
Ÿ VIDEO OUT
From the input of a TV/monitor
See page 6.
@ TO SP-NXT10W
From the subwoofer (with the supplied
system cable)
See page 7.
5
When placing the main unit horizontally
Also use the same hole as illustrated below when installing
the main unit on a wall (see page 11).
Cords
Cords
How to detach the connector
cover