Troubleshooting - JVC NX-T10 Instructions Manual

Troubleshooting

General
Adjustments or settings are suddenly canceled before you
finish.
] There is a time limit. Repeat the procedure again.
Operations are disabled.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the power cord
and then plug it back in.
Unable to operate the System from the remote control.
] The path between the remote control and the remote
sensor on the System is blocked.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
No picture is displayed on the TV screen, the picture is
blurred, or the picture is divided into two parts.
] The video cord connections are incorrect or loose.
] The System is connected to a TV which does not
support progressive video input.
] Incorrect scanning mode is selected (see pages 14 and
15).
] When you unplug the power cord and plug it back
again, the scanning mode may change back to the initial
setting (see pages 14 and 15).
The left and right edges of the picture are missing on the
screen.
] Select "4:3 LB" for "TV TYPE" (see page 39).
The picture is distorted.
] A device, such as a VCR or an HDD/DVD recorder, is
connected between the main unit and the TV. Connect
the main unit directly to the TV (see page 6).
The screen size is improper.
] The monitor type setting is not appropriate. Select the
monitor type suitable for your TV (see page 39).
] The screen size setting of the TV is improper.
The TV screen is dark.
] The screen saver setting is activated. Press any button
(see page 39).
FM Radio Operations
Hard to hear broadcasts because of noise.
] Antenna connections are incorrect or loose.
] The FM antenna is not properly extended and
positioned.
Disc/USB Mass Storage Class Device Playback
Operations
The disc cannot be played back.
] You have inserted a disc whose Region Code is not
correct (see page 3). ("WRONG REGION" appears on
the TV.)
] The disc is placed upside down. Place the disc with the
label side facing front or facing up.
ID3 Tag on an MP3 file cannot be shown.
] There are two types of ID3 Tag—Version 1 and Version
2. This System can only show ID3 Tag Version 1.
Groups and tracks are not played back as you expect.
] The playing order is determined when the groups
and tracks were recorded. It depends on the writing
application.
MP3, WMA, JPEG, MPEG-1, MPEG-2, or DivX files are
not played back.
] The disc or the USB mass storage class device may
contain different types of files (ex. MP3/WMA/JPEG).
In this case, you can only play back the files selected on
the control screen (see page 19).
] You have changed the file type setting after the System
read the disc or the USB mass storage class device. In
this case, reload the disc or disconnect the USB mass
storage class device and connect it again.
Continued on the next page
46