Connections - JVC UX-GP9D Instructions Manual

Connections

Do not connect the AC power cord until all other connections have been made.
NOTES:
• Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep
the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor
reception.
• Make sure both the speakers are connected correctly and firmly.
• When connecting the speaker cords, match the polarity of the speaker terminals: red color to (+) and black color to (–).
• DO NOT connect more than one speaker to each terminal.
• DO NOT allow the conductor of the speaker cords to be in touch with the metallic parts of the System.
To connect the DAB antenna
(supplied)
Extend it so that you can receive your
desired ensembles.
DAB antenna (supplied)
Rear view
To a wall outlet
Plug the AC power cord only after all connections are complete.
3
For better DAB reception
Disconnect the supplied DAB antenna, and connect an active
antenna.
(See "Improving the DAB Reception" on page 11.)