Setup Menu Operations; Setting Up Playback Of Discs/Usb Devices/Hdmi Devices - JVC NX-T10 Instructions Manual

Remote control
Number
buttons
Menu Item
SCREEN SAVER
TV TYPE
16:9
4:3 PS
PASSWORD
RATING
EXIT SETUP
39

Setup Menu Operations

You can set the SCREEN SAVER function (ON or OFF). If no operation is done
for about 3 minutes, the TV screen becomes dark.
You can select the monitor type to match your TV when you play back pictures
4:3 LB
recorded for wide-screen televisions.
4:3 PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed
in to fill the screen vertically and the left and right sides of the picture are cut off.
4:3 LB (Letter Box conversion): For a conventional (4:3) TV. Displays a wide-
screen picture to fit the width of the TV screen keeping the aspect ratio.
16:9 (Wide-screen television): Select this when the aspect ratio of your wide-
screen TV is 16:9.
You can prohibit operations used for changing the RATING setup. Enter a four-
digit password. We recommend that you write your password here for your
reminder. &&&&
Password:
If you forget your password, you can release it by entering 0000.
You can set playable rating level with the System.
Exits from the Setup menu.
INFO
Setting Up Playback of Discs/
USB Devices/HDMI Devices
You can change the settings of playback of discs/USB mass
storage class device/HDMI devices connected to HDMI IN
1 or 2 with the Setup menu on the TV.
• The Setup menu can be used only when "DVD/CD,"
"USB," "HDMI 1," or "HDMI 2" is selected as the source.
1
Press SET UP.
The Setup menu appears on the TV and playback is
paused.
SCREEN SAVER
TV TYPE
P AS SWORD
RATI NG
EXIT SETUP
2
Press 3 (or 2) to select the menu.
3
Press ∞ (or 5) to move to select the item.
4
Press ENTER.
5
Press ∞ (or 5) to select the options, then press
ENTER.
To exit from the Setup menu
Press SET UP.
Contents
Remote
ONLY