Charge The Battery - Mustek S400W User Manual

Charge the Battery

Wireless Scanner has a built-in rechargeable
battery to provide power, make sure it has been
fully charged before use.
1. Press POWER button to turn Off the Scanner.
* The Power LED indicator shall turn off.
2. Connect the USB cable to the Scanner at
small end and to a computer (
power adapter (
B
* The Power LED indicator shall emit red light to
indicate the battery is charging.
3. Once the battery is fully charged, the Power
LED shall turn off, then disconnect the USB
cable from the Scanner.
NOTES NOTES
•
Charge the Scanner for approximately 4 hours or
until the Power LED indicator turns off.
•
When a low battery alerts (a green Power LED
blinks), charge the Scanner immediately.
•
Scanner will not charge while operating.
Scanner's power is off when charging battery.
•
The rechargeable battery is consumable. The
battery capacity will decreased gradually.
) or to USB
A
) at the other end.
Ensure
NOTE: E:
USB power USB power
adapter not included. Use
the USB power adapter
provided with your mobile
device to connect a
power socket.
A
B
7