Charge The Battery - Mustek S400W iScan Air User Manual

Charge the Battery

The Scanner has a built-in rechargeable battery to
provide power, make sure it has been fully charged
before use.
1. Press POWER button to turn Off the Scanner.
* The Power LED indicator will turn off.
2. Connect the USB cable to the Scanner at small
end and to a computer(
adapter( B ) at the other end.
* The Power LED indicator will emit red light to indicate the
battery is charging.
3. Once the battery is fully charged, the Power LED
will turn off, then disconnect the USB cable from
the Scanner.
NOTES
Charge the Scanner for approximately 4 hours or until
•
the Power LED indicator turns off.
When a low battery alerts (a green Power LED blinks),
•
charge the Scanner immediately.
Scanner will not charge while operating. Ensure
•
Scanner's power is off when charging battery.
• The rechargeable battery is consumable. The battery
capacity will decreased gradually.
• Dispose of batteries safely (Do not dispose of batteries
in fire, batteries may explode or leak).
A
), or to USB power
B
The USB power adapter not
included. Use the USB power
adapter provided with your
mobile device to connect a
power socket.
A
OFF
OFF
7