Connect Via Wi-Fi Network - Mustek S400W User Manual

Connect via Wi-Fi Network

Wireless Scanner incorporates Wi-Fi capabilities
with soft AP (access point) function which enables
to share it to multiple devices. Follow below steps
to connect Wireless Scanner to your iPad, iPhone,
iPod touch, Android mobile devices, Windows 8
devices, and Mac computers via an existing Wi-Fi
network in your location.
1. Press and hold POWER button for
to turn Wireless Scanner on.
* The Power LED indicator shall emit green. Wait
approximately 20 seconds for Wireless Scanner to
initialize, and then the Wi-Fi LED indicator shall blink
blue light to indicate Wi-Fi function is enabled.
2. Enable the Wi-Fi mode on your
search for available wireless networks. Find the
network name "DIRECT-xxxxxx_iScanAir"
for Wireless Scanner.
* The "xxxxxx" in the network name is a 6-digit code
randomly assigned for your Wireless Scanner.
3. Input 8-digit password "
connect to Wireless Scanner.
* The Wi-Fi indicator shall stop blinking and remain a
steady blue light after connected.
2 seconds
device, and
12345678
" to
ON
- Press POWER 2 secs,
the Power LED will emit a
steady green light.
OFF - Press POWER 4
the Power LED will turn off.
Wi-Fi On Connected
Blinking Blue LED - Wi-Fi
function is enabled.
Steady Blue LED - Wireless
Scanner is connected to a device.
secs,
11