Connect To Wireless Network (Wifi Mode) - Mustek H410W User Manual

Connect to Wireless Network (WiFi Mode)

You can make a direct wireless connection between the
Scanner and your device in following steps.
1. Press and hold the
until the power LED emits green light.
* Wait about 20 seconds until the
2. Enable the WiFi mode on your device, search the
"DIRECT-xxxxxx_iScanAirGo" network for the
Scanner, then select it.
* The "xxxxxx" in the network name is a 6-digit code randomly
assigned for your Scanner.
3. Input 8-digit password "
the Scanner.
* The LED will stop blinking and become a solid blue light
after connected.
NOTES
• It's strongly recommended to disable the Bluetooth function on
your mobile device before connecting the scanner, as Bluetooth
transmissions can interfere with the Wi-Fi signals.
• Use the Scanner within 60 feet~100 feet (18m~30m) from your
mobile device in an obstacle free indoor environment.
• The Scanner will automatically shut down if there is no
operation for 5 minutes for saving power.
• The Scanner allows connection up to 8 mobile devices at once.
• To turn power off, press
Power LED indicator turns off.
12
/SCAN button for 3 seconds
LED blinks blue light.
12345678
" to connect
/SCAN button for 4 seconds until the
ON
Wi-Fi On Connected