Safety precautions
Installation precautions
Observe the following precautions when installing with any items such as the
optional stand.
When using the optional stand, brackets, or equivalent items
• Ask your dealer to perform the installation.
• Be sure to use the supplied bolts.
• For details, see the instruction manual that comes with the optional stand (or
equivalent items).
When using other items
• Consult your dealer.
• The following mounting holes can be used for the installation:
Rear view
(PDP-LX609A)
Mounting
holes
(PDP-LX509A/PDP-C509A)
W
Mounting
holes
W
T
W
(LAN (10/100) port is unavailable for PDP-C509A)
Caution
• Use M8 screws, which go 12 mm to 18 mm in depth from the mounting
surface of the flat screen TV. See the side view shown to the right.
• Be careful not to block the ventilation opening at the rear of the flat screen TV.
• Be sure to install the flat screen TV on a flat surface because it contains glass.
• The screw holes other than the illustrations above are to be used only for the
specified products. Never use them for mounting non-specified products.
• Do not mount or remove the flat screen TV to or from the stand, with speakers
attached.
Note
• It is strongly recommended to use the optional Pioneer mounting products.
• Pioneer shall not be liable for any personal injury or product damage that
results from the use of mounting items other than the optional Pioneer
products.
Side view
Mounting
holes
W
Mounting
holes
W
T
W
Mounting surface
Mounting bracket
(or equivalent item)
Flat screen TV
M8 screw
12 mm to 18 mm
02
9
En