Blue Led Dimmer; Orbiter; Video Pattern; Screen Protection - Pioneer Kuro PDP-LX609A Operating Instructions Manual

Useful adjustment settings

Blue LED Dimmer

You can adjust the brightness of the Power ON indicator depending on the
brightness level of the viewing area. When "Auto" is selected, the brightness of
the indicator changes to "High", "Mid" or "Low" to match the brightness level of
the viewing area.
1 Repeat steps 1 to 3 provided for
source only) .
2 Select "Blue LED Dimmer" (/ then ENTER).
3 Select "Auto", "High", "Mid" or "Low" (/ then ENTER).
4 Press HOME MENU to exit the menu.

Orbiter

This function automatically shifts the image little by little to reduce the
occurrence of the burning.
1 Repeat steps 1 to 3 provided for
source only) .
2 Select "Orbiter" (/ then ENTER).
3 Select "Mode 1" or "Mode 2" (/ then ENTER).
(AV source)
Item Description
Off
Disables the Orbiter
Mode 1 Enables the display protection function for any screen mode
(default) other than "Dot by Dot"
Mode 2 Enables the display protection function for all available screen
modes
(PC source)
Item Description
Off (default) Disables the Orbiter
Mode 1 Enables the Orbiter
Mode 2 Smoothes text/characters display
4 Press HOME MENU to exit the menu.
To cancel this function, select "Off" in step 3.
Note
• For the Dot by Dot mode, see Selecting a screen size manually on page 41.

Video Pattern

You can display the Video Pattern screen that also helps eliminate after-image
when it occurs.
1 Repeat steps 1 to 3 provided for
source only) .
2 Select "Video Pattern" (/ then ENTER).
A confirmation screen appears.
3 Select "Start" (ENTER).
The Video Pattern screen displays.
Note
• The system is automatically placed into standby one hour after the Video
Pattern screen has started.
• While the Video Pattern screen is on, no buttons operate except TV a on the
remote control unit, STANDBY/ON and Power On (a) on the flat screen TV.
If any of the above buttons is pressed, a message appears on screen (the
Video Pattern function is on).
• To cancel the Video Pattern screen, press TV a on the remote control unit,
press STANDBY/ON or turn Power On (a) off on the flat screen TV.
Switching the vertical drive mode (AV
Switching the vertical drive mode (AV
Switching the vertical drive mode (AV
• The Video Pattern timer has priority over the sleep timer. When the Video
Pattern timer is on, the sleep timer becomes ineffective.

Screen Protection

This function establishes multiple settings for a longer display life. To select this
option, follow the procedure below.
1 Repeat steps 1 to 3 provided for
source only) .
2 Select "Screen Protection" (/ then ENTER).
The following settings are automatically entered:
• Auto Size: Wide-Zoom
• Side Mask - Detection: Mode 1
• Orbiter: Mode 1
• Energy Save: Mode 1
• AV Selection: OPTIMUM (when "DYNAMIC" is selected for "AV Selection")
3 Select "Yes" or "No" (/ then ENTER).
4 Press HOME MENU to exit the menu.

Label Input

You can enter the broadcast name in each channel using the on-screen software
keyboard. For entry, follow the procedure below.
1 Repeat steps 1 to 3 provided for
source only) .
2 Select "Label Input" (/ then ENTER).
3 Select an input (/ then ENTER).
The software keyboard appears.
For entry, highlight the desired key, then press ENTER. Up to eight characters can
be entered for each label.
Refer to step 7 for Labelling TV channels on page 27.
Label
K I D S
1 2 3 4 5 6 7 8 9 0
A B C D E F G H
K L M N O P Q R S T
U V W X Y Z ,
& ' ( ) + - *

Sleep Timer

When the selected time elapses, the Sleep Timer automatically places the system
into the standby mode.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Sleep Timer" (/ then ENTER).
4 Select the desired time (/ then ENTER).
Select "Off" (cancel), "30 min", "60 min", "90 min" or "120 min".
5 Press HOME MENU again to exit the menu.
Note
• Pressing TOOLS also causes the "Sleep" menu to appear.
• Five minutes before the selected time elapses, the remaining time appears
every minute.
• When the sleep timer has been set, "Remain ---min" appears at the top of the
menu.
Switching the vertical drive mode (AV
Switching the vertical drive mode (AV
I J Delete
Space
. : ; Caps
/ _ @ OK Cancel
11
43
En