Safety Precautions - Pioneer Kuro PDP-LX609A Operating Instructions Manual

02

Safety precautions

Chapter 2
Safety precautions
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product has
been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential
danger, please observe the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong the service life of your
product, please read the following precautions carefully before using the product.
1. Read instructions - All operating instructions must be read and understood
before the product is operated.
2. Keep this manual in a safe place - These safety and operating instructions
must be kept in a safe place for future reference.
3. Observe warnings - All warnings on the product and in the instructions must
be observed closely.
4. Follow instructions - All operating instructions must be followed.
5. Cleaning - Unplug the power cord from the AC outlet before cleaning the
product. To clean the product, use the supplied cleaning cloth or other soft
clothes (e.g., cotton, flannel). Do not use liquid cleaners or aerosol cleaners.
6. Attachments - Do not use attachments not recommended by the
manufacturer. Use of inadequate attachments can result in accidents.
7. Water and moisture - Do not use the product near water, such as bathtub,
washbasin, kitchen sink and laundry tub, swimming pool and in a wet
basement.
8. Stand - Do not place the product on an unstable cart, stand, tripod or table.
Placing the product on an unstable base can cause the product to fall,
resulting in serious personal injuries as well as damage to the product. Use
only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a
wall, be sure to follow the manufacturer's instructions. Use only the
mounting hardware recommended by the manufacturer.
9. When relocating the product placed on a cart, it must be moved with utmost
care. Sudden stops, excessive force and uneven floor surface can cause the
product to fall from the cart.
10. Ventilation - The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the life of the product. Do
not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or the manufacturer's
instructions are followed.
11. Power source - This product must operate on a power source specified on the
specification label. If you are not sure of the type of power supply used in your
home, consult your dealer or local power company.
12. Power cord protection - The power cords must be routed properly to prevent
people from stepping on them or objects from resting on them. Check the
cords at the plugs and product.
13. The plasma display panel used in this product is made of glass. Therefore, it
can break when the product is dropped or applied with impact. Be careful
not to be injured by broken glass pieces in case the plasma panel breaks.
14. Overloading - Do not overload AC outlets or extension cords. Overloading
can cause fire or electric shock.
15. Entering of objects and liquids - Never insert an object into the product
through vents or openings. High voltage flows in the product, and inserting
an object can cause electric shock and/or short internal parts. For the same
reason, do not spill water or liquid on the product.
8
En
16. Servicing - Do not attempt to service the product yourself. Removing covers
can expose you to high voltage and other dangerous conditions. Request a
qualified service person to perform servicing.
17. Repair - If any of the following conditions occurs, unplug the power cord from
the AC outlet, and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen
into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the
operating instructions.
Do not touch the controls other than those described in the operating
instructions. Improper adjustment of controls not described in the
instructions can cause damage, which often requires extensive adjustment
work by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable
abnormality in the product indicates that the product needs servicing.
18. Replacement parts - In case the product needs replacement parts, make
sure that the service person uses replacement parts specified by the
manufacturer, or those with the same characteristics and performance as
the original parts. Use of unauthorised parts can result in fire, electric shock
and/or other danger.
19. Safety checks - Upon completion of service or repair work, request the
service technician to perform safety checks to ensure that the product is in
proper operating condition.
20. Wall or ceiling mounting - When mounting the product on a wall or ceiling,
be sure to install the product according to the method recommended by the
manufacturer.
21. Heat sources - Keep the product away from heat sources such as radiators,
heaters, stoves and other heat-generating products (including amplifiers).
22. Unplug the power cord from the AC outlet before installing the speakers.
23. Never expose the screen of the flat screen TV to a strong impact, for example,
by hitting it. The screen may be broken, resulting in fire or personal injury.
24. Do not expose the flat screen TV to direct sunlight for a long period of time.
The optical characteristics of the front protection panel changes, resulting in
discolouration or warp.
25. The flat screen TV weighs about 50.8 kg (112.0 lbs) for the PDP-LX609A and
about 33.8 kg (74.6 lbs) for the PDP-LX509A/PDP-C509A. Because it has
small depth and is unstable, unpack, carry, and install the product with one
more person at least and use the handles.