Using With Other Equipment; Connecting A Dvd Player; Connecting A Set-Top Box - Pioneer Kuro PDP-LX609A Operating Instructions Manual

Using with other equipment

Chapter 12
Using with other equipment
You can connect many types of external equipment to your flat screen TV, like a
DVD player, set-top box, VCR, game console, personal computer and camcorder.
To view images coming from external equipment, select the input source using
INPUT 1 to INPUT 6 or PC on the remote control (page 13) or INPUT on the flat
screen TV.
Caution
• To protect all equipment, always unplug the flat screen TV from the power
outlet before connecting to a DVD player, set-top box, VCR, game console,
personal computer, camcorder or other external equipment.
Note
• Refer to the relevant operation manual (DVD player, etc.) carefully before
making connections.
• Unless stated otherwise, the connecting cables shown in the illustrations are
readily available commercially, but are not supplied with this product.

Connecting a DVD player

Use the INPUT 2 terminals when connecting to a DVD player and other
audiovisual equipment.
Use either Component, S-Video or standard video cable for the video signal. Use
a stereo audio cable for the audio. (If you're using the standard video input, you
can use a red/white/yellow audio/video cable.)
T
W
Rear view
Audio/Video
cable
DVD playback
To watch a DVD, press INPUT 2 on the remote control unit or press INPUT on the
flat screen TV to select "INPUT 2".
Note
• Signal priority for the INPUT 2 terminals is (1) Component Video, (2) S-Video,
(3) Video.
• Connect only the type of video cable that will actually be used.
• Refer to your DVD player operation manual for the signal type.
T
W
Component
video cable
DVD player

Connecting a set-top box

Use the INPUT 1 terminals when connecting a set-top box and other audiovisual
equipment.
T
W
Rear view
Audio/Video
cable
Displaying broadcasts via a set-top box
To watch a set-top box image, press INPUT 1 on the remote control unit or press
INPUT on the flat screen TV to select "INPUT 1".
Note
• Signal priority for the INPUT 1 terminals is (1) S-Video, (2) Video.
• Connect only the type of video cable that will actually be used.
• Refer to your set top box operation manual for the signal type.
T
W
S-Video cable
Set-top box
12
45
En