Preparation
Installation precautions
Observe the following precautions when installing with
any items such as the optional stand.
When using other stands, brackets or equivalent
items
•
Consult your dealer.
•
The following mounting holes can be used for the
installation.
Rear view
(KRL-37V)
Mounting
holes
(KRL-32V)
Mounting
holes
NOTE
•
The mounting holes can be used after removing the
black seals and the screws.
CAUTION
•
Use M6 screws, which go 12 mm to 15 mm in
depth from the mounting surface of the flat screen
TV. See the side view shown to the right.
•
Be careful not to block the ventilation opening at the
rear of the flat screen TV.
•
Be sure to install the flat screen TV on a flat surface
because the LCD panel used in this product is made
of glass.
•
The screw holes other than the illustrations above
are to be used only for the specified products. Never
use them for mounting non-specified products.
NOTE
•
Pioneer shall not be liable for any personal injury
or product damage that results from the use of
mounting items.
Downloaded From TV-Manual.com Manuals
12
Side view
Mounting
holes
Mounting
holes
Mounting surface
Mounting bracket
Flat
(or equivalent item)
screen
TV
M6 screw
12 mm to 15 mm