Filling The Water Tank; Receiving Water From The Water Dispenser - Logik LSBSDX17 Instruction Manual

Filling the Water Tank

You can fill drinking water into the water tank
through either opening the small lid or the large lid.
Close the lid after filling.
• Do not fill above the level, otherwise, it may overflow.
• Before filling with water, ensure that the water tank is steady and in a correct position.
• Apart from drinking water, other beverages (such as milk, juice, carbonated beverage,
etc) are not suggested to be used, especially beverages that include grain must not
be used (may result in blockage and damage).
• Hot water must not be filled into the water tank directly.
• Do not touch other parts of the unit when filling water, it may lead to leakage.

Receiving Water from the Water Dispenser

• Before you dispense the water, make sure the lock
device is at "Unlock" position.
• Ensure to slide to "Lock" position after
each use to prevent children from playing
with the lever.
• When at "Lock" position, do not push on
the lever with force. It will damage the
mechanism.
• You should use the type of container that can fit
under the water dispenser. Place the container
properly underneath and push on the lever for
water to flow.
12
Small lid
Large lid