Filling The Water Tank; Receiving Water From The Water Dispenser - Logik LSBSDX20 Instruction Manual

Filling the Water Tank

Open the small tank cover of the water tank. Fill drinking water
into the water tank through the hole. Close the cover after
filling.
• Do not fill above the level, otherwise, it may
overflow.
• Before filling with water, ensure that the water
tank is steady and in a correct position.
• Apart from drinking water, other beverages
(such as milk, juice, carbonated beverage,
etc) are not suggested to be used, especially
beverages that include grain must not be
used (may result in blockage and damage).
• Hot water must not be filled into the water
tank directly.
• Do not touch other parts of the unit when
filling water, it may lead to leakage.

Receiving Water from the Water Dispenser

The water dispenser is located on the front of the fridge door.
Place a cup under the outlet and gently push against the dispenser level.
Ensure the cup is lined up with the dispenser to prevent spillage. You should
use the type of container that can fit under the water dispenser.
• After each use, small amounts of water may drip from the water dispenser. This is
normal.
The excess water will collect in the water overflow tray. Empty the water overflow tray
periodically to prevent spillage.
11