Smart Mode; Lock And Unlock; Door Alarm; Before Using The Water Dispenser - Logik LSBSDX17 Instruction Manual

Smart Mode

When Smart mode is selected, the temperature of the appliance will be automatically adjusted
(fridge temperature will be set to 6°C and freezer temperature will be set to -18°C).
• Press repeatedly to select Smart function (

Lock and Unlock

All buttons are locked if
will be locked automatically after 20 seconds when no more buttons are pressed.

Door Alarm

If the door is open for a long time, an alarm will sound. Close the door to clear the alarm.

Before Using the Water Dispenser

Before using the water dispenser, clean the water tank first.
1. Take out the water tank by gripping it tightly on both sides,
then keep pulling it upward and downward with some
force until removed.
2. Take off the water tank cover, and wash the water tank,
valve and its cover. After washing, drain the water from
inside the tank and replace the cover.
3. Before installing, check and ensure the washer
inside the dispenser hole is positioned properly.
Make sure the washer inside the dispenser
hole is in proper position before installing
the water tank. This is because the washer
may turn inside out or loosen when
removing the water tank.
If the washer is not positioned properly,
take off the fixed holder then adjust the
washer to the correct position. Replace the
fixed holder.
4. Insert the water tank valve into the water dispenser hole first.
Be careful not to press on the tank valve.
5. Fit the water tank along the guides on the door. Press down on both sides of the water tank.
6. When a click is heard, that means the installation is completed.
Tank valve
Dispenser hole
is illuminated. To unlock, press
uide
). The light will be illuminated.
for 3 seconds. The appliance
Fix e d h o ld e r
Wa s h e r
wrong position
correct position
11